Brake Caliper Type 911 Sticker - Die-Cut Decal

911 Brake Caliper Decal

This high-temperature marking sticker is designed for the aesthetic restoration of braking systems such as 911, 996, 997, 718... High-performance polymer vinyl, heat resistant up to +/- 100°C.

Important note: Out of respect for industrial property rights, our presentation visuals feature a censorship banner or blurring. The final product is a replacement lettering compliant with restoration standards.

Die-cut sticker, no background, ready to use on transparent transfer tape. High-gloss colors.

Non-contractual photos, please refer to the dimensions provided. Visuals are only dedicated to product colors and do not represent the size of the sticker when choosing the dimension.

Dimensions: 5 cm x h 0.35 cm - 5.5 cm x h 0.38 cm - 6 cm x h 0.42 cm - 6.5 cm x h 0.45 cm - 7 cm x h 0.49 cm - 7.5 cm x h 0.53 cm - 8 cm x h 0.58 cm - 8.5 cm x h 0.59 cm - 9 cm x h 0.63 cm - 9.5 cm x h 0.66 cm - 10 cm x h 0.7 cm 11 cm x h 0.77 cm - 12 cm x h 0.84 cm

Adhesive: Mass-tinted PVC/Calendered polymer vinyl with adhesive backing. Adheres to all flat or slightly curved surfaces.

Resistance: Temperature resistant up to +90°C, strong resistance to weather and UV, solvents / chemicals.

Lifespan: 8/10 years for black, white - 7/8 years for colors - 4 years for metallic: gold, silver, anthracite, and graphite.

ℹ️ APPLICATION INSTRUCTIONS:
The application surface must be clean, degreased, and smooth. Avoid applying after a water-repellent treatment. Recommended application temperature is +18°C (+64°F) or above.
For winter application, the adhesive hardens if the bodywork or glass is freezing cold; heat the surface (glass or bodywork) with a hairdryer.
Rub firmly over the transparent transfer tape with a squeegee or a microfiber cloth before removing it.

To apply stickers on a treated car (PPF, ceramic coating, or wax), the method depends on the desired finish level:

Standard method (thorough degreasing): Wipe the exact application area with Isopropyl Alcohol (IPA) concentrated at 70-90% or a panel wipe. This temporarily breaks down the hydrophobic top coat or removes the wax so the adhesive can grip.

Permanent method (local polishing): If the ceramic coating is very fresh and hard, light polishing with a finishing compound is required to strip the ceramic layer on that spot. Then degrease with IPA before applying the sticker.

Ultra-hydrophobic PPF: On high-end self-healing PPF, IPA alone may not be enough. Use a vinyl Adhesion Promoter (such as 3M Primer 94), applying it with a brush only where the adhesive will sit.

Once the sticker is applied, a ceramic coating or wax can be reapplied around and over the sticker to uniform the protection.

For optimal durability: We highly recommend applying a clear coat over the caliper and sticker after light sanding (de-glossing).

Pressure washing: Avoid spraying closer than 30 cm (12 inches). Do not use rotary nozzle lances or ultra-high pressure on small isolated elements if the sticker is unvarnished. The best method is hand washing with a soft brush and car shampoo, as in detailing, then rinsing with clean water.

Download the full sticker application guide under the "Attached Documents" tab.

⚠️ IMPORTANT NOTICE:
As this item is custom-made and precision-cut specifically for your order, it is strictly non-returnable and non-refundable (French Consumer Law, Art. L221-28).
Please double-check your required dimensions before finalizing your purchase. View our terms here.

Reference STK-911-BRAKE

Download