Die-cut Peugeot Sport Sticker with no background

Peugeot Sport Sticker

Precision-cut sticker, no background, ready to apply with transparent transfer tape.

Non-contractual photos: please refer to the provided dimensions. Visuals are intended for color reference only and do not represent the actual size of the selected sticker.

Dimensions: 20 cm x ht 2.97 cm - 25 cm x ht 3.72 cm - 30 cm x ht 4.46 cm - 40 cm x ht 5.95 cm - 50 cm x ht 7.44 cm - 60 cm x ht 8.92 cm - 70 cm x ht 10.41 cm - 80 cm x ht 11.9 cm

Adhesive: High-quality polymeric calendered PVC/Vinyl, dyed-in-the-mass. Adheres to all flat or slightly curved surfaces.

Resistance: Heat resistant up to +90°C, high weather and UV resistance, resistant to solvents and chemicals.

Lifespan: 8-10 years (Black/White) - 7-8 years (Colors) - 4 years (Metallic: Gold, Silver, Anthracite, Graphite).

ℹ️ APPLICATION INSTRUCTIONS:
The application surface must be clean, degreased, and smooth. Avoid applying after a water-repellent treatment. Recommended application temperature is +18°C (+64°F) or above.
For winter application, the adhesive hardens if the bodywork or glass is freezing cold; heat the surface (glass or bodywork) with a hairdryer.
Rub firmly over the transparent transfer tape with a squeegee or a microfiber cloth before removing it.

To apply stickers on a treated car (PPF, ceramic coating, or wax), the method depends on the desired finish level:

Standard method (thorough degreasing): Wipe the exact application area with Isopropyl Alcohol (IPA) concentrated at 70-90% or a panel wipe. This temporarily breaks down the hydrophobic top coat or removes the wax so the adhesive can grip.

Permanent method (local polishing): If the ceramic coating is very fresh and hard, light polishing with a finishing compound is required to strip the ceramic layer on that spot. Then degrease with IPA before applying the sticker.

Ultra-hydrophobic PPF: On high-end self-healing PPF, IPA alone may not be enough. Use a vinyl Adhesion Promoter (such as 3M Primer 94), applying it with a brush only where the adhesive will sit.

Once the sticker is applied, a ceramic coating or wax can be reapplied around and over the sticker to uniform the protection.

For optimal durability: It is possible to apply a clear coat over the sticker after light sanding (de-glossing).

Pressure washing: Avoid spraying closer than 30 cm (12 inches). Do not use rotary nozzle lances or ultra-high pressure on small isolated elements if the sticker is unvarnished. The best method is hand washing with a soft brush and car shampoo, as in detailing, then rinsing with clean water.

Download the full sticker application guide under the "Attached Documents" tab.

⚠️ IMPORTANT NOTICE:
As this item is custom-made and precision-cut specifically for your order, it is strictly non-returnable and non-refundable (French Consumer Law, Art. L221-28).
Please double-check your required dimensions before finalizing your purchase. View our terms here.