Audi RS Caliper Sticker
€4.00
Replacement "RS" sticker designed for the aesthetic restoration of braking systems on sports cars from Neckarsulm. Ideal for restoring your calipers with high-temperature lettering or rejuvenating heat shields; not suitable for covering OEM logos.
A clear coat is highly recommended for the longevity of the lettering.
Measure the available flat area (maximum length and height) on your caliper, then compare your results with the dimensions in the drop-down menu and the heights specified in the detailed description.
If you would like another color or a custom size, please contact us.
Sold individually.
Guarantees - Secure Payments
Shipping Policy
Returns / Withdrawal Policy
Audi RS Brake Caliper Sticker
This high-temperature marking sticker is designed for the aesthetic restoration of Audi RS-type braking systems... High-performance polymer vinyl, heat resistance +/- 100°C (+/- 212°F).
Die-cut sticker, without background, ready to use on transparent transfer tape. Colors are pre-assembled and feature a glossy finish.
Non-contractual photos, please refer to the provided dimensions; the visuals are solely dedicated to the product colors and do not represent the actual size of the sticker when choosing the dimension.
Dimensions : 48 mm x ht 17.7 mm - 65 mm x ht 24 mm - 67 mm x ht 24.7 mm - 68 mm x ht 25.1 mm - 70 mm x ht 25.8 mm - 75 mm x ht 27.6 mm
Adhesive: Mass-tinted PVC/Calendered polymer vinyl with adhesive backing. Adheres to all flat or slightly curved surfaces.
Resistance: Temperature resistant up to +90°C, strong resistance to weather and UV, solvents / chemicals.
Lifespan: 8/10 years for black, white - 7/8 years for colors - 4 years for metallic: gold, silver, anthracite, and graphite.
ℹ️ APPLICATION INSTRUCTIONS:
The application surface must be clean, degreased, and smooth. Avoid applying after a water-repellent treatment. Recommended application temperature is +18°C (+64°F) or above.
For winter application, the adhesive hardens if the bodywork or glass is freezing cold; heat the surface (glass or bodywork) with a hairdryer.
Rub firmly over the transparent transfer tape with a squeegee or a microfiber cloth before removing it.
To apply stickers on a treated car (PPF, ceramic coating, or wax), the method depends on the desired finish level:
Standard method (thorough degreasing): Wipe the exact application area with Isopropyl Alcohol (IPA) concentrated at 70-90% or a panel wipe. This temporarily breaks down the hydrophobic top coat or removes the wax so the adhesive can grip.
Permanent method (local polishing): If the ceramic coating is very fresh and hard, light polishing with a finishing compound is required to strip the ceramic layer on that spot. Then degrease with IPA before applying the sticker.
Ultra-hydrophobic PPF: On high-end self-healing PPF, IPA alone may not be enough. Use a vinyl Adhesion Promoter (such as 3M Primer 94), applying it with a brush only where the adhesive will sit.
Once the sticker is applied, a ceramic coating or wax can be reapplied around and over the sticker to uniform the protection.
For optimal durability: We highly recommend applying a clear coat over the caliper and sticker after light sanding (de-glossing).
Pressure washing: Avoid spraying closer than 30 cm (12 inches). Do not use rotary nozzle lances or ultra-high pressure on small isolated elements if the sticker is unvarnished. The best method is hand washing with a soft brush and car shampoo, as in detailing, then rinsing with clean water.
Download the full sticker application guide under the "Attached Documents" tab.
⚠️ IMPORTANT NOTICE:
As this item is custom-made and precision-cut specifically for your order, it is strictly non-returnable and non-refundable (French Consumer Law, Art. L221-28).
Please double-check your required dimensions before finalizing your purchase. View our terms here.
STK-CALIPER-RS
4 other products in the same category:
Customers who bought this product also bought:
Comments (0)
No customer reviews for the moment.
Replacement "RS" sticker designed for the aesthetic restoration of braking systems on sports cars from Neckarsulm. Ideal for restoring your calipers with high-temperature lettering or rejuvenating heat shields; not suitable for covering OEM logos.
A clear coat is highly recommended for the longevity of the lettering.
Measure the available flat area (maximum length and height) on your caliper, then compare your results with the dimensions in the drop-down menu and the heights specified in the detailed description.
If you would like another color or a custom size, please contact us.
Sold individually.
